top of page

Classes

At our club we run the following classes. Please read the below with the rules for each class:

Tamiya Stock:

  • Listed chassis only: TT01, TT02, TA02, M-Chassis

  • Any option or hop-up parts

  • Kit speed controller / HW 1060

  • Tamiya sport, Torque tuned or Core RC core 21 motor

  • OR

  • HobbyWing Juststock combo 21.5

  • Any servo up to the value of £58

  • 7.2V NiMH battery up to 5300mAh

  • Lipo max capacity - 5300mAh 

  • Bodyshell must represent a car

  • Any rubber treaded or slick tyre

  • Tyre additive allowed - only MR33 V4

  • No tyre warmers

  • No gyro

  • Tamiya Trucks are also allowed in this heat.

​

​

MTC (Mini Touring car):

  • Pro MTC Chassis

  • Any option or hop-up parts

  • ESC - Below £75 - HobbyWing Juststock 17.5t

  • Motors:

               - Trackstar 17.5t V2 "Stock" OR "Outlaw"​

               -Zombie 17.5t "Clubman" OR "Insane III"

               -Rage 17.5t "Clubman"

  • BRCA Approved 2S LiPo allowed (must be charge in LiPo sack at ALL times 

  • Bodyshell: Car Based (210/225mm)

  • Rubber only, either Rush Minis or Sweep

  • Tyre additive allowed - only MR33 V4

  • No tyre warmers

​

​

Pro Touring:

  • Any 1/10th Pro Touring car

  • Any BRCA approved bodyshell

  • BRCA approved motors (up to 13.5T)

  • BRCA Approved 2S LiPo allowed (must be charge in LiPo sack at ALL times

  • Any rubber treaded or slick tyre

  • Tyre additive allowed - only MR33 V4

  • Tyre warmers allowed

  • No gyro

  • No reverse

​

​

Frontie:

  • Any FWD Pro Touring car

  • Hobbywing Just Stock 17.5T Combo (17,500 RPM Limit)

  • 5.0 FDR (Final Drive Ratio)

  • BRCA approved FWD Body

  • Tyres - Ride TR09 Slicks 

  • BRCA Approved 2S LiPo allowed (must be charge in LiPo sack at ALL times 

  • Minimum weight 1250g

  • No solid locked diffs permitted, diff action must be present

  • Tyre additive allowed - only MR33 V4

  • No tyre warmers

  • No gyro

  • No reverse

​

For all classes, chassis must have a ride height of 5mm on chassis and 9mm on the bodyshell. Body must be painted.

Battery and charging rules:

 

1. All batteries used must be in conformance with the BRCA Approved Battery List.

2. All LiPO batteries must be charged in a LiPO bag and supervised at all times. Any batteries found charging unsupervised will be disconnected.

3. In accordance with the BRCA rules, the maximum voltage a single LiPo cell can be charged to is 4.2v, with a maximum charge rate of 1c. i.e. 4800mA battery may be charged at a maximum 4.8A.

4. Swollen or damaged batteries are NOT to be used.

5. A  2s Lipo may only be charged to 7.4V. BRCA approved 7.6V Lipos are allowed however are not to be charged to 7.6V

 

These rules are implemented to safeguard everybody and are followed at all times. If you are unsure or have any questions please ask a member of the committee.

 

Anybody not complying with the above will be asked to leave with immediate effect.

bottom of page